PLANTMATE™ Self-Watering Planter

Water sits in the built-in reservoir and moves through the wick into the potting mix by capillary action. No pump, battery or power connection is needed.

Add water through the fill opening, check the visible blue water-level marker, and rotate the base to adjust wick flow. Start with a lower flow setting and make small adjustments while checking the soil and your plant.

Approximate overall size: 12 cm outer diameter × 16.8 cm tall (4.72 × 6.61 inches). Check your plant and available space before ordering.

3D-printed in PLA for indoor use. Use a light, well-draining indoor potting mix and follow the supplied instructions. Visible layer lines and small finish variations are normal for a 3D-printed product.

Check the blue water-level marker and refill when it reads low. Check the soil before increasing wick flow; if it is still damp below the surface, wait before adjusting.

There is no fixed refill interval. Water use varies with plant type, potting mix, light, temperature and plant size. Follow the supplied instructions and adjust gradually.

• One PLANTMATE planter in your selected colour

• Built-in water reservoir and adjustable wick-flow system

• Wick material

• Printed instructions

Plant, potting mix and decorative props shown in the images are not included. Images show different colour options; each order is for one planter.

PLANTMATE™ is designed and produced in small batches in Canada by JET-Concepts Inc., with each unit inspected before shipping.